dbx DriveRack 480 User Manual Download Page 80

Page: 80 / 117

• To customize the mode of operation to best suit your needs, it is recommended that at this point, you set your

desired preferences in the preference folder, which can be accessed in the file menu and will appear as follows:

Note: The Baud rate must be set to 38400.

• To Edit a selected unit, from VENUE view, simply double-click on the unit icon

and a display screen will appear as follows:

• At this point, you can either use the mouse or the arrow keys to move to any one of the

module blocks that you wish to edit by selecting and double-clicking. The following illus-
tration shows the

CONFIGURATION

view with several module blocks open.

• To change programs, move to program title screen and use the Up or Down arrow keys to

change programs.

Network Functions

SECTION 7

DriveRack

™

DriveRack™ User Manual

Summary of Contents for DriveRack 480






















































































































Search results

Summary of Contents for DriveRack 480

Reviews:

Related manuals for DriveRack 480

Brands by name

Popular brands

dbx DriveRack 480, User Manual

Search results

Summary of Contents for DriveRack 480

Reviews:

Related manuals for DriveRack 480

Brands by name

Popular brands