Manual-1
OPERATORS MANUAL
MQ 302
STEREO GRAPHIC EQUALIZER
QUICK START
If this is your first equalizer, please do yourself and your speakers a favor and read at least the first five pages. “An
ounce of prevention...,” and all that.
The MQ 302 is a stereo equalizer, so adjusting any slider affects both Channels simultaneously. Begin by setting all
sliders to their center detent (0 dB), and the
INPUT LEVEL
to
8
. Try to make more cuts than boosts. After equalizing, use
the EQ switch to compare equalized and non-equalized signal. While
EQ
is switched to
ACTIVE
(
out
), adjust the
INPUT
LEVEL
to the same level as when
EQ
is switched to
BYPASS
(
in
).
You may use either the XLR or ¼" connectors for Inputs or Outputs. Connect only one
INPUT
type per channel. The
XLR and ¼" TRS inputs do not sum. You may, however, use both types of
OUTPUT
S simultanesously if desired.
