7
3.7 SUSPENSION TRAUMA STRAP:
Some models
of the ExoFit NEX™ Full Body Harness are equipped
with a Suspension Trauma Strap (Figure 5) to
help prolong allowable suspension time in the
event of a fall from height. It should only be
used in situations where a fall has occurred or for
training. To use the Suspension Trauma Strap:
Step 1.
Unzip the Trauma Strap Pouch on each
hip of the harness and deploy the
Suspension Straps (Figure 5A).
Step 2.
Raise the ends of the straps to access
the hook and loops. Insert the hook
into the loop that provides the desired
strap length.
Step 3.
Lower the Suspension Strap and step
onto the strap to alleviate pressure
of the harness leg straps on the legs
(Figure 5B). Adjust the hook/loop
combination for optimal comfort.
WARNING:
Seek medical attention following
a suspension.
Figure 5 - Suspension Trauma Straps
A
B
3.8 EXOFIT NEX GLOBAL WIND ENERGY
HARNESS MODEL REPLACEABLE LUMBAR
PROTECTOR:
The Lumbar Protector (A) can be
replaced in the
fi
eld when worn or damaged (See
Figure 6).
Place the ExoFit harness on a
fl
at surface. Pull the
hip belt (B) completely out of the harness to free
the worn/damaged Lumbar Protector (A) and tool
loops (D, if installed).
To install the replacement Lumbar Protector:
Step 1.
Reinsert the hip belt through the left
D-Ring (C), the end of the
fi
rst tool
loop (D, if installed), belt loops (E) and
(F), and the end of the tool loop (D).
Step 2.
Insert the hip belt through the
replacement Lumbar Protector (G), the
second tool loop (H, if installed), the
next two belt loops (I) and (K), the
end of the tool loop (H) and the right
D-Ring.
Figure 6 - Replaceable Lumbar Protector
A
B
C
D
E
D
F
I
H
G
H
K
