CBT36K Assembly Manual
Page
28
of 89
ALTHOUGH THE PANELS ARE MIRRORED, NEITHER THE DRIVERS NOR THE WIRING IS
MIRRORED; THIS WAY BOTH PANELS WILL HAVE IDENTICAL WIRE ROUTES.
For example, if the ND91 is rotated such that it is mirrored between the right and left panel, the (+)
and (-) terminals will be reversed on right panel and this would require a wiring scheme that
differs from those included in this manual.
Follow the directions carefully on the following pages and you won’t make a mistake!
6.2.
P
ARTS AND
T
OOLS FOR
D
RIVER
I
NSTALLATION
:
Parts and tools needed for driver installation. This photo shows a layout of the front panels alongside 18
ND91-8 mid-bass drivers, 18 four-tweeter PC modules, a plastic bag of screws, and a battery-operated
motorized screw driver.
DRIVERS SHOULD BE TESTED BEFORE INSTALLING ON THEM ON THE FRONT PANELS.
6.3.
M
OUNT
T
WEETER
M
ODULES TO
F
RONT
P
ANEL
:
6.3.1.
Remove Debris from Front Panel:
Clear any debris from holes and areas that may restrict the modules from seating into the panel. Use a
burst of compressed air for stubborn areas.