CBT36K Assembly Manual
Page
29
of 89
6.3.2.
Orient Red Terminals on Tweeter Module:
Locate the Red marks on the tweeter module and load each in the panel with the (+) side located as
shown in the following images.
6.3.3.
Locate Tweeter Module on Front Panel:
Carefully position the tweeter modules on the panel. Be sure to check the location of the red terminal for
proper orientation.
6.3.4.
Tweeter Module (+) Terminal Orientation:
The (+) tweeter terminals will be on the right when looking from the bottom of the panels. The tape
covering the rear holes of the mid-bass drivers will be added later in section 6.4.5. The tape prevents
debris from entering the driver through these holes.
