CBT36K Assembly Manual
PROPER ORIENTATION IN THE FOLLOWING STEPS IS CRITICAL TO ENSURE THE
WIRING IS CORRECTLY PREPARED.
6.1.1.
Position the Front Panels:
Position panels as shown, face down with tweeter cut outs next to each other.
THIS MIRRORED ARRANGEMENT WILL ENSURE THAT THE WIRE ROUTES POSITION
THE INPUT AT THE BOTTOM OF THE PANELS.
6.1.2.
Number each Driver Position:
Using Fig. 7 as a reference, number each driver position and label the bottom of each panel. “Bottom
Left”, and “Bottom Right”.
6.1.3.
Draw Lines Between each Bank:
Using Fig. 7 as a reference, draw lines between each bank; use the line drawing in Fig. 7 to identify the
proper locations.
Page
27
of 89
