CBT36K Assembly Manual
Page
22
of
89
5.4.1.
18 AWG Stranded-Wire Table:
Locate the 18 AWG wire for the ND91 Mid-Bass Drivers and cut to the lengths and quantities shown in
the following table (
Note:
the listed quantities in this and the following tables are for a pair of CBT36s).
Notes for the 18 AWG wire table:
For wire ends that need to be "Tinned", heat the wire with an 800 degree soldering iron and apply just
enough solder so the wire ends are evenly coated with solder.
Wires 8, 12, 16 and 17, form a “J” shape on the tinned 3/4 inch end.
