CBT36K Assembly Manual
Page
38
of 89
7.2.3. Bank 3 Wiring Diagram:
Fig. 11. Bank 3 wiring diagram for mid-bass drivers 11 to 14.
7.2.3.1. Final view of Mid-Bass Bank 3 Drivers with all Connections in Place:
View of Bank 3 wiring. Compare your work with this photo after wiring. Position the wires and resistors as
shown in the photo until all soldering is complete.
NOTE:
The dangling resistors in the above and the following photo will later be attached to the backs of
the drivers with adhesive.
7.2.4. Banks 4 and 5 Wiring Diagram:
15
16
17
18
6” Gray
6” Gray
6” Gray
Bank 4 and 5 Wiring Diagram
4”Yellow
6” Gray
Bank 4,5 Input
28” Red to Bank 5+
4”Yellow
4”Yellow
4”Yellow
3//3 ohm
2//2 ohm
Use 18AWG wire for all BASS-MID wiring.
Fig. 12. Banks 4 and 5 wiring diagram of the mid-bass shading network for mid-bass drivers
15 to 18.