54
CHAPTER 5.
USAGE
Figure 5.30.: IPMI Event Log
Once you changed the filter settings, click on ‘Update’ in order to update the shown entries (see Fig-
ure
5.30
). If the checkbox ‘Get sensor names’ is checked all sensor IDs will be shown with their
respective names.
The time that is shown in the log entries is the SEL time, which means that this time is independent
to the system time. The actual SEL time is shown at the top of the log table.
With the button ‘Clear Event Log’ you can delete all entries in the SEL repository.
Status via IPMI
Figure 5.31.: Example of IPMI State panel
The Status via IPMI function shows the current values and the min/max-thresholds of all fans,
temperatures and voltages existing in the host system. An example of such an IPMI panel is shown
in Figure
5.31
. You can change the thresholds by editing the according values and pressing ’Apply’.
The first time you call this page, it may take up to two minutes until the sensor data will be shown.
Note:
If IPMI is disabled, Status via IPMI and System Log via IPMI are not available (the corre-
sponding menu options are not visible).
Summary of Contents for LARA
