Daxten LARA, Manual, Page: 13 / 89

1. The Quick Installation Guide
Installation
LARA redirects local keyboard, mouse and video data to a remote administration console. All data
is transmitted via IP. LARA can be used in a multi administrator and multi server environment
as well. Combining LARAs with a KVM switched matrix allows to access multiple remote servers
over a single remote console.
Connectors
Front Side Connectors (Figure 1.1 )
LARA
w
w
w
.p
e
p
p
e
rc
o
n
.c
o
m
R
ST
G
R
AB
IS
D
N
FU
LL
VG
A
R
U
N
10
0
local
mouse
local
keyboard
local video
interface
Figure 1.1.: LARA Front Side Connectors
Reset Pushing this button performs a reset of LARA. The button is important for the initial
configuration of LARA
VGA Indicates, that the VGA input is active and a video signal is received by LARA
RUN Indicates whether the LARA system is running or not
100 Indicates that the Ethernet connection is in 100 Mbit mode
FULL Indicates that the Ethernet connection is in full-duplex mode
ISDN Indicates that the ISDN subsystem is available and active
GRAB Indicates that a remote user is logged onto LARA and the video engine is outputting data
Using the connectors for video and keyboard/mouse a local console might be connected simultane-
ously.
Rear Side Connectors (Figure 1.2 on the next page)
SUB-D 9 Serial 1 The standard serial connector is used in multiple ways: