Daxten LARA, Manual, Page: 58 / 89

46 CHAPTER 5. USAGE
Table 5.11 – continued from previous page
Parameter Description
Enable Host Traps If this option is checked, LARA will send SNMP traps whenever
the host is reset, powered down or powered up.
Trap destinations Here you can enter the IP addresses, to which the traps will
be sent. For every IP address, you have to set an according
community. This is necessary so that your management client
can identify the SNMP traps.
5.5.5. Serial Settings
The LARA Serial Settings (Figure 5.25 ) allow you to specify, what devices are connected to the
two serial ports and how to use them.
Figure 5.25.: Serial Settings
Serial Port 1 This port may be used for different purposes. All possible options are listed and
described in Table 5.12 .