Daxten LARA, Manual, Page: 56 / 89

44 CHAPTER 5. USAGE
Table 5.10.: Dynamic DNS options
Parameter Description
Enable Dynamic DNS This enables the Dynamic DNS service. This requires a config-
ured DNS server IP address.
Dynamic DNS server Here you enter the server name where LARA registers
itself
in regular intervals. If left blank the default
(www.dyndns.peppercon.com) will be used.
Nickname You have registered this nickname during your manual registra-
tion with the Dynamic DNS Server. Spaces are not allowed in
the Nickname!
Check time LARA card registers itself in the Dynamic DNS server at this
time.
Check interval This is the interval for reporting again to the Dynamic DNS
server by LARA.
ˆ
MAC address / IP address / Netmask / Gateway of LAN interface
ˆ
Configured users
ˆ
Currently active users with login time (login time is only valid if time is synchronized on
LARA)
ˆ
Server’s power state
ˆ
The following actions can be initiated via SNMP:
ˆ
Reset server
ˆ
Power on/off server
ˆ
Reset LARA
The following events are reported by LARA via SNMP:
ˆ
Login trial at LARA failed.
ˆ
Login trial at LARA succeeded.
ˆ
Denying access to a particular action.
ˆ
Server was reset.
ˆ
Server was powered on/off.
The SNMP settings panel as shown in Figure 5.24 on the next page, described in Table 5.11 , allows
you to change SNMP related parameters.
Table 5.11.: SNMP setting parameters