Daxten LARA, Manual, Page: 22 / 89

10 CHAPTER 3. INSTALLATION
3.2. Connectors and Jumpers
3.2.1. Front Side Connectors
Figure 3.3 shows the connectors on LARA’s front side.
LARA
w
w
w
.p
e
p
p
e
rc
o
n
.c
o
m
R
ST
G
R
AB
IS
D
N
FU
LL
VG
A
R
U
N
10
0
local
mouse
local
keyboard
local video
interface
Figure 3.3.: LARA Front Side Connectors
RST Pushing this button performs a reset of LARA. One has to use this button for the initial
configuration of LARA
VGA Indicates, that the VGA input is active and a video signal is received by LARA
RUN Indicates whether the LARA system is running or not
100 Indicates that the Ethernet connection is in 100 Mbit mode
FULL Indicates that the Ethernet connection is in full-duplex mode
ISDN Indicates that the ISDN subsystem is available and active (EMEA version only)
GRAB Indicates that a remote user is logged onto LARA and the video engine is outputting data
In case you want to connect a local console to the host system besides LARA, you can attach
monitor, keyboard and mouse to the according LARA connectors on its front.
3.2.2. Rear Side Connectors
Figure 3.4 shows the connectors on LARA’s rear side.
ISDN
Ethernet
Serial 1
Keyboard/Video/Mouse
Power
Serial 2
Figure 3.4.: Rear Side Connectors
SUB-D 9 Serial 1 The standard serial connector is used in multiple ways:
ˆ
IPMI Version 1.5 connection to the remote system using the IPMI Option
cable