Datex-Ohmeda S/5 PRESTN, Technical Reference Manual Slot

Page: 7 / 84

S/5 M-PRESTN Modules
1
Document No. 8005571-1
INTRODUCTION
This Technical Reference Manual Slot provides information for the maintenance and service of the
hemodynamic modules S/5 M-PRESTN/-RESTN/-PRETN. The modules are double width modules
designed for use with S/5 monitors. Later in this manual modules may be referred to w/o the
system name S/5 for simplicity.
Please also refer to Technical Reference Manual of the S/5 monitor for information regarding
system specific information e.g. related documentation, conventions used, symbols on equipment,
safety precautions, system description, system installation, interfacing, functional check and
planned maintenance.
The M-PRESTN/-RESTN/-PRETN modules provide general hemodynamic parameters.
NIBP
ECG
SpO
T1
T2
P1
P2
2
Auto
On/Off
Start
Cancel
Zero
P1
Zero
P2
NOTE: Do not use identical modules in the same
monitor simultaneously.
The following modules are considered identical:
M-ESTP/-EST/-ETP,
M-ESTPR/-ESTR/-ETPR,
M-NESTPR/-NESTR/-NETPR,
M-NE12STPR/-NE12STR/-NE12TPR
M-PRESTN/M-RESTN/M-PRETN
Figure 1 S/5 PRESTN Module, M-PRESTN
Table 1 Options of S/5 hemodynamic modules
Parameter PRESTN RESTN PRETN
P Two invasive blood pressures
• •
R Impedance respiration
• • •
E ECG • • •
S Pulse oximetry
• •
T Two temperatures
• • •
N NIBP • • •
NOTE: 12-lead ECG measurement requires Display Controller, B-DISP or B-DISPX.
Intended purpose (Indications for use)
The Datex-Ohmeda PRESTN module (model family M-PRESTN) and accessories are indicated for
monitoring of hemodynamic parameters of all hospital patients. The hemodynamic parameters of
the module comprise ECG including ST-segment and arrhythmia, Impedance respiration, NIBP,
Temperature,SpO2 (including monitoring during conditions of clinical patient motion),and invasive
blood pressure.