AP25 Installation and Operating Guide
Page 100
AP25 Installation & Operating Guide
Document # 9301H79500 Ver. 1.00
A subsequent action is defined in a separate Automation Edit Action screen and the option
Conditional is selected. Then enter the previously defined variable name and whether it
should be TRUE or FALSE before the action is executed.
This is shown in Figure 83. The Action to pulse GPO-1 will occur only if the variable
Test_A has been set as FALSE.
Figure 83. Automation Edit Action screen – Conditional GPO
Use descriptive variable names.
Try to keep variable names short and simple. The conditional action will not
work as expected if the name does not match exactly.
If the conditional action occurs and the variable has not been set as TRUE or
FALSE, the variable is presumed to be FALSE.
Format Change –
Configure an event when a format is changed.
When Format Change is selected, an action or macro is run when the format changes to one
selected from the dropdown list. Select an Action or Macro to run. If Macro is selected,
choose a macro from the dropdown list. If Action is selected, touch the white box that
appears below it. This will bring up the Automation Edit Action screen (for a description of
options available, see Figure 81, and text following it, above). In Figure 84 below, when the
format changes to “Digital Cinema” the Digital Cinema macro is run.
Touch OK when finished, or touch Cancel to cancel this task.
