background image

 

AP25 Installation and Operating Guide 

 Page 32 

 

 

 

AP25 Installation & Operating Guide  

Document # 9301H79500 Ver. 1.00 

Table 6. AP25 Preset Formats 

Name 

Source 

Digital Cinema 

Digital In (1-16) 

HDMI 1 

HDMI Port 1 

HDMI 2 

HDMI Port 2 

HDMI 3 

HDMI Port 3 

HDMI 4 

HDMI Port 4 

Nonsync1 

Nonsync1 

Nonsync2 

Nonsync2 

SPDIF   

S/PDIF 3 Dig 

TOS A 

S/PDIF 1 Optical 

TOS B 

S/PDIF 2 Optical 

XD20 A 

Analog 8Chan 

XD20 D 

Digital In (1-16) 

2.8.2  Default EQ 

The Default EQ appear in the Audio EQ Edit screen for Copy Preset to EQ. See a sample screen on page 
79. 

There is only one option for Default EQ (Flat), which has EQ filters flat, parametric filters disabled, and 
Dirac optimization off. Use this format as a starting point to create a new EQ set.  

2.8.3  Default Channel Profiles 

The Default Channel profile appears in the Audio Profile Edit screen for the 

Copy Default to Profile

 

option. Select Channel Profile > Edit Profiles > Copy Default to Profile and then select from the 
dropdown menu Copy from Default.  See a sample screen at 4.3.8.2 Edit Profiles, page 85. 

There are two default channel profiles: 6-channel and 8-channel.  

The 6-channel profile assigns 6 channels as named in the table below and enables the VU meters for 6 
channels. 

Table 7. Default 6-Channel Profile 

Channel 

Name 

LFE 

Ls 

Rs 

Summary of Contents for AP25











































































































































































Reviews: