AP25 Installation and Operating Guide
Version 1.00
Appendix H. Serial Command AP!
H-8
Document #: 9301H79500 Ver. 1.00
Automation
9.
Execute an AP25 Macro
Command: @
RUNMACRO
<space>
[Macro]
<CR>
Operation
Response:
[OK
or
ERR no macro]
<CR>
Write
This is used to execute a macro defined in the AP25.
Parameters
[Macro]
This is the macro name to execute. The name must match exactly the macro
name on AP25.
Note: Spaces may be used within the name.
OK
Response after macro is found and executed.
ERR no macro
Response if macro does not exist on the AP25.
Example
Run Macro named Auto1
Send:
RUNMACRO Auto1
Receive:
OK
Level Commands
10.
Master Fader Level
Command: @
FADER
<space>
[New Level]
<CR>
Operation
Response:
FADER
<space>
[Level]
<CR>
Read/Write
This is used to set or read the fader level.
Parameters
[New Level]
Value to set the fader in tenths.
Omit this argument to only read the fader value.
[Level]
Current master fader level in tenths
.
Example
Set the master fader to 7.0
Send:
FADER 70
Receive:
FADER 70
