AP25 Installation and Operating Guide
Version 1.00
Appendix F. H338 Optical Film Card Option
F-15
Document #: 9301H79500 Ver. 1.00
Menu (System)
→
Formats
→
Input Source
Figure 20 – Input Source Screen
F4.4.7.
Matrix Bass Extension
Items needed: RTA with Microphone
When Matrix/Optical Bass Extension (OBE) is selected, the left half of the screen allows you
to enable pink noise on Center and/or LFE channels. The right half of the screen provides
settings for the parameters of optical bass gain and low pass filter frequency.
Note: Input source must be set to Optical for the Film Options menu to be available.
Menu (System)
→
Formats
→
Format Options
→
Film Options
→
Bass Enh
Figure 21 – Matrix Bass Extension
Gain
allows you to set the gain for the optical bass. Press the button with the number
displayed and rotate the main fader to adjust for the desired level.
Low Pass Filter
allows you to choose the frequency of the filter. Press the button with the
number displayed and rotate the main fader to adjust the desired frequency.
When adjusting the Bass Extension, set up a microphone in the auditorium. It is best to use a
single microphone, or if using a multiplexer select single microphone only, and connect it to
the RTA.
Select an optical format on the AP25, enable pink noise on the center channel, and note the
level and low frequency roll off displayed on the RTA. Select the appropriate Low Pass Filter
