AP25 Installation and Operating Guide
Page 98
AP25 Installation & Operating Guide
Document # 9301H79500 Ver. 1.00
Event Type –
When an event is first added the event type defaults to “No Event”, this means the
event type is not configured and should be replaced with one of the other event types.
GPI –
Configure an input event
When GPI is selected, an input may be configured to run either a single action or a macro
when it receives a signal.
Figure 80. Automation Edit Event Screen - GPI
Select an input (GPI-1 thru 18 or Projector) from the dropdown list (under “When” on the
right of the screen). Select the signal (“goes” Low or High). Select an Action or a Macro to
run. If Macro is selected, choose a macro from the dropdown list. If Action is selected,
tap/touch the name that appears in the white box. This will bring up the Automation Edit
Action screen.
Figure 81. Automation Edit Action screen
Execute:
o
Always
– The action is always executed.
o
Conditional –
The action is executed conditionally based on a previous event.
Select the
Action Type:
from the dropdown menu. The following choices are available:
