Datamax I-class series, Operator'S Manual

Page: 157 / 198

RIBBON LOW Sets the type of output signal generated to indicate Ribbon Low condition where:
ACTIVE LOW Outputs a logic low upon condition.
ACTIVE HIGH Outputs a logic high upon condition..
SLEW ENABLE Selects the type of input signal required to initiate label slew, where:
STANDARD Triggers slew with a low signal.
LOW PULSE Triggers slew with a low pulse.
HIGH PULSE Triggers slew with a high pulse.
ACTIVE LOW Triggers slew with a low signal.
ACTIVE HIGH Triggers slew with a high signal.
Err On Pause
(App2)
Sets the output when a service required fault occurs (Applicator Interface Card
Type 2 equipped only), where:
ENABLED Enables the output signal.
DISABLED Disables the output signal.
System Settings
The System Settings menu contains label formatting, operation, and control functions:

Menu Mode

Configuration File

Internal Module*

Default Module*

Scaleable Font Cache*

Single Byte Symbols*

Double Byte Symbols*

Time And Date

Media Counters*

Print Configuration*

Configuration Level*

Set Factory Defaults*

Format Attributes*

Label Rotation

Imaging Mode*

Pause Mode*

Peel Mode*

Security*

Units Of Measure*

Input Mode*

DPL Emulation*

Column Emulation*

Row Emulation*

SOP Emulation*

Back After Print*

Font Emulation*

Label Store*

Menu Language

Display Settings*

Fault Handling*

SCL Font Bold Factor*

Items denoted with an asterisk (*) are only accessible through the Advanced Menu.
The menu selections are defined as follows: