Datamax I-class series Operator'S Manual Download Page 31

Page: 31 / 198

I-Class

Printer Options (continued)

Menu Item

Details

RFID

Controls the RFID operation, where:

RFID MODULE

Sets the mode of RFID operation, where:



DISABLED

Disables RFID.

Selects the Securakey option.

UHF CLASS 1

Selects the Alien option.

UHF MULTI-PROTOCOL

Selects the UHF cross-platform option.

RFID POSITION

Sets the RFID encoding position, where:



1.10in (110 - 4.00)

Is the inlay location, as referenced from the leading
edge of the tag moving in the direction of print.

HF SETTINGS

Sets the HF RFID encoding settings, where:

TAG TYPE

Selects the tag type, where:



ISO 15693

TI
PHILIPS
ST LRI512
ST LRI64

Is the type to be encoded.

AFI VALUE

Sets the Application Family Identifier value, where:



00 (HEX)

Is the value (00 - FF).

AFI LOCK

Locks the AFI value, where:



DISABLED

Is not protected.

ENABLED

Is write-protected.

DSFID VALUE

Sets the Data Storage Format Identifier value, where:



00 (HEX)

Is the value (00 - FF).

Summary of Contents for I-class series







































































































































































































Search results

Summary of Contents for I-class series

Reviews:

Related manuals for I-class series

Brands by name

Popular brands

Datamax I-class series, Operator'S Manual

Search results

Summary of Contents for I-class series

Reviews:

Related manuals for I-class series

Brands by name

Popular brands