Datamax I-class series Operator'S Manual Download Page 106

Page: 106 / 198

I-Class

Creating a Menu Language:



Invoke Excel and open the gemmsglst.xls file. Excel opens the file and the following
screen appears.



Click the “Enable Macro” box and the following appears:

Click On Column J and enter your new language, or modify an existing one.

Tips:

A) Message Size – When entering new messages, reference the “MAX” column: this is

the maximum number of characters allowed for this field. Warnings are displayed
when the number of characters is exceeded or when trying to modify the MAX value.

Beware that “cutting” and “pasting” fields could defeat this warning system.

B) Two Line Messages – Some of the message are displayed as two lines. These are

indicated in the comment fields.

Summary of Contents for I-class series







































































































































































































Search results

Summary of Contents for I-class series

Reviews:

Related manuals for I-class series

Brands by name

Popular brands

Datamax I-class series, Operator'S Manual

Search results

Summary of Contents for I-class series

Reviews:

Related manuals for I-class series

Brands by name

Popular brands