Datamax I-class series Operator'S Manual Download Page 33

Page: 33 / 198

I-Class

Printer Options (continued)

Menu Item

Details

KILL CODE

Code to permanently deactivate the tag, where:

00 00 00 00

Is the code, in the form B3, B2, B1, B0.

ACCESS CODE

Code to protect tag memory contents, where:

00 00 00 00

Is the code, in the form B3, B2, B1, B0.

GEN 2 LOCK ACTION

Sets the lock for Gen 2 tags, where:



NONE

Does not lock the tag.

PERMALOCK

Locks data permanently.

PWD-READ/WRITE

Locks data with password-protection for writing data.

BOTH

Allows both Permalock and PWD-Lock to be used.

PAD/TRUNC. EPC DATA

Allows padding or truncating of data with nulls

(represented as “00”) in order to fit the selected EPC
Tag Data Size, where:



DISABLED

Does not pad or truncate data.

LEADING

Adds nulls to the front (left) of the data if less than the

size, or cuts the data if greater.

TRAILING

Adds nulls to the end (right) of the data if less than the

size, or cuts the data if greater.

LOCK CODE (ALIEN HW)

Sets the lock code for Alien Gen 2 tags, where:



00 (HEX)

Is the code (00 - FF).

LOCK AFTER WRITE

Locks the tag after programming, where:



DISABLED

No lock occurs.

ENABLED

Locks the tag.

Summary of Contents for I-class series







































































































































































































Search results

Summary of Contents for I-class series

Reviews:

Related manuals for I-class series

Brands by name

Popular brands

Datamax I-class series, Operator'S Manual

Search results

Summary of Contents for I-class series

Reviews:

Related manuals for I-class series

Brands by name

Popular brands