Approved Media
To achieve optimum print quality and maximum printhead life, Datamax-O’Neil specifies the use of
Datamax-O’Neil brand media and ribbons. These supplies are specially formulated for use in our
printers; use of non-Datamax-O’Neil supplies may affect the print quality, performance, and life of
the printer or its components.
E
J
I
C
K
A
B
D
H
F
G
Side View
Top View
Media Dimensional Requirements
Designator
Description
Minimum
[1]
Maximum
[1]
A
Label
width
1.00
4.65
B
Liner width
1.00
4.65
C
Gap (or notch) between labels
[3]
.10
–
D
Label
length
[3]
.25
–
E
Media
thickness
.0025
.010
F
Notch
opening
width
.20
.500
G
Media edge to sensor aperture distance
.20
2.25
H
Reflective (black) mark width
[2]
.50
4.65
I
Distance between reflective marks
[3]
.50
–
J
Reflective mark length
[3]
.10
–
K
Label repeat distance
[3]
.35
–
[1]
Units of measure are given in inches and referenced by the direction of label feed.
[2]
The reflective (black) mark must be carbon based, placed on the backside of the stock, and the
reflectance shall be less than 10% at wavelengths of 950 and 640 nm.
[3]
The maximum allowable length of the combined label and gap (or mark) measurement cannot
exceed 99.99 inches.
Summary of Contents for I-class series
Page 1: ...Operator s Manual ...
Page 118: ...Operator s Manual ...