Datamax I-class series Operator'S Manual Download Page 133

Page: 133 / 198

3.2

Windows

Driver

The Windows driver is located on the Accessories CD-Rom included with your printer.



Be sure your printer’s firmware version is 10.03_0016B or greater.



Be sure your printer’s USB Mode is set to “Printer”. This mode can be viewed/changed via the

printer’s front panel menu under: Communications> USB Port> USB Device Class.

Installing the Windows Driver:

Place the Accessories CD-Rom included with

your printer into your computers CD-Rom drive.

Once the CD-Rom starts select "Install Windows

Driver" from the main menu and follow the
instructions on the screen to install.

When prompted, select your printer from the

list, (i.e. Datamax-O’Neil I-Class MarkII).

Continue to follow the on-screen instructions to
install the driver.

Summary of Contents for I-class series







































































































































































































Search results

Summary of Contents for I-class series

Reviews:

Related manuals for I-class series

Brands by name

Popular brands

Datamax I-class series, Operator'S Manual

Search results

Summary of Contents for I-class series

Reviews:

Related manuals for I-class series

Brands by name

Popular brands