POWERSCAN
™
BT8300
14
PowerScan™ BT8300 Family
Link by Inquiry
1.
Enter Configuration
Ì$+;Î
2.
Handheld - Cradle
3.
Exit and Save Configuration
Ì$-?Î
4. To connect another PowerScan PBT8300 to the BC 8030-BT cradle, repeat in the sequence from steps 1 through
3 before continuing. One Cradle can connect with a maximum of four readers.
5. Quickly press the button (<8 seconds and release) on the BC 8030-BT cradle. The yellow LED on the cradle will
blink and it will search for any PowerScan BT 8300 readers in radio range. After finishing, the cradle will emit a
beep and begin to link with PowerScan BT8300 readers found.
6. The green LED on each PowerScan BT8300 reader will blink when the BC 8030-BT cradle tries to link with it. To
confirm the connection with the cradle, press the trigger on the reader within 10 seconds, before the timeout
expires.
7. Four ascending beeps will be emitted, signaling that the BC 8030-BT cradle has been successfully connected to
the PowerScan BT8300, and the green LED on the reader will stop blinking.
8. Upon completing the connection between the reader and cradle you must set up the correct interface for your
system. Refer to the BC 8030-BT Base Station Charger QRG for information and programming labels, and scan
the appropriate bar code to select your system’s interface type.
END of procedure. YOUR READER IS NOW READY TO READ CODES.
Summary of Contents for PowerScan BT8300 Family
Page 191: ......
