Enter Configuration
Exit and Save Configuration
Ì$+;Î
16-KEY DK MODEL PARAMETERS
Ì$-?Î
Product Reference Guide
125
REPEAT TIMEOUT
Repeat Timeout allows the user to program an optional intercode delay (in msec.) between two codes in a set of codes to be transmitted
from scanner to host via Radio interface, when the scanner is in quantity mode.
N
OTE: Qty/Code Send Mode must be set to option 2 (code in CODE field is sent out for a QTY number of times). See Qty/Code
Send Mode on the previous page).
The number of codes depends on the unit inserted via keypad by the user, to cope with different use cases. A minimum delay of 100 ms
will be always present, the delay can be adjusted in 10ms increments.
Disable
set Repeat Timeout
Read the above code.
Select the length of the delay you want to set by scanning two barcodes (01 – 99) from the Hex Numeric table in the back of this
manual.
Example:
To program Repeat Timeout = 60ms
set Repeat Timeout
Value
Time (ms)
Read
+
06
=
60ms
Summary of Contents for PowerScan BT8300 Family
Page 191: ......
