POWERSCAN™ BT8300
4
PowerScan™ BT8300 Family
Collect and recycle waste batteries separately from the device in compliance with European Directive 2006/66/EC,
2002/95/EC, 2002/96/EC and subsequent modifications, US and China regulatory and others laws and regulations about the
environment.
2.7.2 Battery
Charging
Once the system is connected and powered, place the PowerScan™ BT8300 into the cradle to charge the battery. When
the reader is correctly inserted in the cradle, the "Reader" red LED on the cradle goes on to indicate that the battery is
charging. The "Reader" green LED on the cradle goes on when the battery is completely charged.
2.7.3
Replacing PowerScan™ BT8300 Batteries
To change the batteries in your PowerScan™ BT8300 scanner, press the black button or unscrew the fixing screw on the
handle cover and extract the battery pack from the reader handle.
When the batteries are extracted from the scanner, the timer maintains the current hour and
date for about 1 minute.
NOTE
Replace the old battery pack with a new one by inserting it within the reader handle and pushing it until it clicks.
Do not incinerate, disassemble, short terminals or expose to high temperature. Risk
of fire, explosion. Use specified charger only. Risk of explosion if the battery is
replaced by an incorrect type. Dispose of the batteries as required by the relevant
laws in force. See “Battery Safety” on the previous pages.
WARNING
1
2
Summary of Contents for PowerScan BT8300 Family
Page 191: ......
