Datalogic Accu-Sort AccuVision AV6010 Page 27 System Manual Download

Page: 27 / 245

AccuVision

AV6010 Long-Range Camera System Manual

Chapter 3

03-AV6010_Mechanical_Installation_R10.doc

Accu-Sort Systems, Inc.

Mechanical Installation

IMPORTANT:

The AV6010 contains electronics that may be affected by

electrostatic discharge (ESD). To prevent personal injury or damage to the

unit, please follow the safety precautions and warnings found in

Chapter 2

Failure to follow these precautions may void your warranty.

Preparing for Mechanical Install

IMPORTANT:

Application-specific drawings and documents provided by

Accu-Sort supersede any contradictory content in this manual.

Before mounting any components, please do the following:

Read all instructions before beginning your installation.

Define and confirm the accuracy of your application’s requirements and

structure position, especially the height of the conveyor from the floor.

Review all installation-specific drawings provided with your equipment.

Review and plan the mechanical installation of all devices used in your

application. Be sure to allow adequate clearance for maintenance.

Review and plan the power requirements for your application.

Check the contents of the shipping cartons against the packing list.

Record all product serial numbers.

IMPORTANT:

The camera system requires a consistent transport speed

and precisely timed triggering events in order to function properly. All

packages must enter and exit the scanning area at constant transport speed.

Variations in speed during scanning / processing will adversely affect the

system’s read rate performance and may also result in

inconsistent communications with the host computer.

Unpacking Instructions

IMPORTANT:

The AV6010 Camera and RangeFinder packaging is

designed to protect the unit(s) during shipment. Do not throw it away. Save

all packing material in case you need to transport your unit(s).

Summary of Contents for Accu-Sort AccuVision AV6010






















































































































































































































































Search results

Summary of Contents for Accu-Sort AccuVision AV6010

Reviews:

Related manuals for Accu-Sort AccuVision AV6010

Brands by name

Popular brands

Datalogic Accu-Sort AccuVision AV6010, System Manual

Search results

Summary of Contents for Accu-Sort AccuVision AV6010

Reviews:

Related manuals for Accu-Sort AccuVision AV6010

Brands by name

Popular brands