136 Troubleshooting
AccuVision
®
AV6010 Long-Range Camera System Manual
Accu-Sort Systems, Inc.
08-AV6010_Troubleshooting_R10.doc
Set Passwords
To set new passwords:
1. Login to the AV6010 user interface.
2. Select
Diagnostics > Tools
in the menu tree.
3. Under the
Set Passwords
section of the screen, enter a new
Setup
Password
and
Monitor Password
.
4. Click
Set Passwords
. The new passwords will be required at the next
login.
Update Software
IMPORTANT:
This procedure is for all camera systems using software
version 4.x or greater. If you need to download and older version of
software, contact Accu-Sort Technical Support at 1-800-BAR-CODE.
Software installation will take a few minutes. During installation, the
camera’s STAT LED cycles through red, green, and amber and then off. Do
NOT reboot or remove power from the camera. When installation is
complete, the camera will reboot automatically.
To load the complete software image:
1. Login to the AV6010 user interface.
2. Select
Diagnostics > Tools
in the menu tree.
3. Under the
Update Software
section of the screen, click
Load Image
.
(Accept the certificate, if prompted to do so.)
4. In the Software Upload Utility, click
Select File
.
5. Select the new AV6010 image file to upload (e.g., leapfrog_cflash.tar.gz).
The file is sent (FTP) to the camera. A progress bar is displayed during
the upload.
6. The camera reboots automatically when the update is complete.
To load a software update patch:
1. Login to the AV6010 user interface.
2. Select
Diagnostics > Tools
in the menu tree.
3. Under the
Update Software
section of the screen, click
Load Patch
.
(Accept the certificate, if prompted to do so.)
4. In the Software Upload Utility, click
Select File
.
5. Select the patch file to upload (e.g., leapfrog_update.tar.gz). The file is
sent (FTP) to the camera. A progress bar is displayed during the upload.
6. The camera reboots automatically when the update is complete.