164 AV6010 User Interface
AccuVision
®
AV6010 Long-Range Camera System Manual
Accu-Sort Systems, Inc.
A2-AV6010_User Interface_R10.doc
Setup > Symbologies Descriptions
Selection
Definition
Enabled Symbologies
Selectable
option
When selected, use the Remove button to delete the symbology
from the active list.
Name
User-defined identifier for the code type.
Symbology
Identifies the type of bar code to be read by the camera
Min. Length
Minimum number of characters in the bar code
Max. Length
Maximum number of characters in the bar code
Filter
Used for bar code character recognition. Only the bar code with
the defined character will be considered a valid read.
Min. Quantity
Minimum number of bar codes to be read from the selected
symbology
Max. Quantity
Maximum number of bar codes to be read from the selected
symbology
Remove
(button)
Use in combination with the selectable option to remove a code
type from the active list of selected symbologies.
Add Symbology
Name
Define a specific name for the symbology.
Select the symbology from the drop-list.
All commonly used 1-D and 2-D symbologies are available.
Other selections appear in this drop-down list:
ASI Diagnostic
–
Aux Result 1
through
Aux Result 4
–
Code Type
Dimensions
– Select so that dimensioning data can be included
in messages. (Requires a dimensioning-enabled top read
camera.)
Min. Length thru Max. Quantity
- See above
Add
(button)
Use to add a new symbology to the Enabled Symbologies list.
Set the symbologies once. The enabled symbologies list is used by all
cameras in a system.