Datalogic Accu-Sort AccuVision AV6010 Page 42 System Manual Download

Page: 42 / 245

Mechanical Installation

AccuVision

AV6010 Long-Range Camera System Manual

Accu-Sort Systems, Inc.

03-AV6010_Mechanical_Installation_R10.doc

To install a mirror for a Bottom read camera:

Place the mirror assembly onto the mirror sled in the position marked.

(Some mirror sleds are the same length as the mirror assembly, in which

case there will be no marks.)

Attach with front-loading hardware. Assure the mirror will not slide in the

sled’s channel when moved into position on the structure. Do not over-

tighten, which allows for adjustment during setup, if necessary.

Assure mirror is positioned facing in the correct direction and at the

correct angle to the break in the conveyor belt.

Lift mirror into position as marked on the bottom-read mounting

structure

Attach with front-loading hardware (do not over-tighten).

IMPORTANT:

Do not remove the protective film from the mirror’s surface

until system setup and calibration.

(See Chapter 5.)

Summary of Contents for Accu-Sort AccuVision AV6010






















































































































































































































































Search results

Summary of Contents for Accu-Sort AccuVision AV6010

Reviews:

Related manuals for Accu-Sort AccuVision AV6010

Brands by name

Popular brands

Datalogic Accu-Sort AccuVision AV6010, System Manual

Search results

Summary of Contents for Accu-Sort AccuVision AV6010

Reviews:

Related manuals for Accu-Sort AccuVision AV6010

Brands by name

Popular brands