D-200 MK2 User Manual Firmware V-6.3
L058D01-EN - 68 -
The program mode is used to adjust timers, operational limits and the configuration of the unit.
Although a free PC program is provided for programming, every parameter may be modified through the front
panel, regardless of the operating mode.
When modified, program parameters are automatically recorded into a non-erasable memory and take effect
immediately.
The program mode will not affect the operation of the unit. Thus programs may be modified anytime, even
while the genset is running.
In order to resume to the factory set parameter values:
-hold pressed the
STOP, LAMP TEST
and
ALARM MUTE
buttons for 5 seconds,
-
“
RETURN TO FACTORY SET
” will be displayed
-immediately press and hold pressed
LAMP TEST
button for 5 seconds
-
factory set values will be reprogrammed to the parameter memory. “
Completed!
” is displayed.
Hold pressed
pushbuttons
Hold pressed
15.1. RESETTING TO FACTORY DEFAULTS
15. PROGRAMMING
Hold
Pressed
For 5
seconds
Summary of Contents for D-200 MK2
Page 39: ...D 200 MK2 User Manual Firmware V 6 3 L058D01 EN 39 6 3 ATS FUNCTIONALITY ...
Page 40: ...D 200 MK2 User Manual Firmware V 6 3 L058D01 EN 40 6 4 REMOTE START FUNCTIONALITY ...
Page 41: ...D 200 MK2 User Manual Firmware V 6 3 L058D01 EN 41 6 5 ENGINE CONTROL FUNCTIONALITY ...
Page 42: ...D 200 MK2 User Manual Firmware V 6 3 L058D01 EN 42 Feature not applicable to this product 6 6 ...
