DataDirect Networks S2A9550, User Manual

Page: 83 / 118

M a n a g i n g t h e S 2 A 9 5 5 0
D a t a D i r e c t N e t w o r k s S 2 A 9 5 5 0 U s e r G u i d e
71
The TELNET KILL command lets the administrator terminate the remote Telnet session
(Figure 3-55)
.
The KILL parameter may also be specified with KILL=m , where m indicates the number of minutes
that will be allowed to elapse before the remote Telnet session is terminated. The valid range is
0..15 minutes. Default is 1 minute if no value is specified. An administrative login is required before
the command is processed.
The remote user is given a warning that the administrator has killed his session, and indicates to him
the amount of time (if any) that he has remaining
(Figure 3-56)
. An
m
value of 0 (zero) is an immediate
KILL. The remote user will be notified but most likely will be unable to read the entire warning
message before the session ends.
Note that if the user is in the middle of running a CLI command at the remote Telnet site when the
administrative KILL is effected, the command will continue as it was in progress, on the CLI console.
It is up to the administrator to finish out such a command in a graceful fashion.
Figure 3-54 Telnet Session Information
[Remote TELNET session ON] Local SUBshell S2A [1]: telnet
Time: 19:49:48 Date: 03/29/2002
Remote Telnet Session Information:
---------------------------------
Owner's Name : admin
Security Level : Administrative
Remote Site IP Address : 010:123:139:005
Local SDD IP Address : 10.123.134.1
Initiated at : 19:49:06 on 03/29/2005
Duration : 0 (seconds)
Most Recent Command
User Entry : whoami
Initiated at : 19:50:52 on 03/29/2005
Completed at : 19:50:52 on 03/29/2005
Idle Time : 0 (seconds)
Figure 3-55 Terminating a Telnet Session
[Remote TELNET session ON] Local SUBshell S2A [1]: telnet kill=1
-- WARNING --
Any CLI command that may be in progress on the remote Telnet site
Enter the administrative (or higher) login name: admin
Enter the appropriate password: ********
will need to be completed locally after the remote session has been
terminated.
-- Please wait for the remote TELNET session to be terminated. --
.........................
Telnet Session termination.
Figure 3-56 Telnet Session Being Terminated
S2A [1]:
-- The System Administrator will terminate this TELNET Session in 30 seconds --
Connection closed by foreign host.
-- The System Administrator will terminate this TELNET Session in 1 minute --