D4-12 Series Four-Post Lifts
40
P/N 5900246 — Rev. B — July 2021
Installing the Power Unit
This section describes how to
install
, but not make the connections to, the Power Unit for your Lift.
An Electrician is
not
needed to install the Power Unit; one is required to connect the Power Unit to its
power source.
The Power Unit
must
be installed on the Power Post; attach it to one of the two Mounting Brackets,
whichever is more convenient for the installation.
Important
:
Many people install the Flex Tube Bracket Plate and/or the Zero Angle Bracket at the
same time as they install the Power Unit. Read
Installing the Pushbutton Air Valve
(the following procedure) for more
information to see if this makes sense for your installation.
⚠
DANGER
Risk of explosion: The Power Unit has internal arcing or parts that may spark and
should not be exposed to flammable vapors. Never expose the Power Unit motor
to rain or other damp environments. Damage to the motor caused by water is
not
covered by the warranty.
Tip
The Power Unit is heavy. We recommend you have one person hold the Power Unit while
another person bolts it in place.
The following drawing shows how to attach the Power Unit to the Power Post.
To install the Power Unit
:
1.
Find the Power Unit, Vibration Dampener, and supplied hardware.
2.
Line up the holes on the Power Unit Back Plate and Vibration Dampener with the four holes in the
Mounting Bracket you want to use.
3.
Secure the Power Unit and Vibration Dampener to the Mounting Plate using four M8 x 1.25 x 25
Bolts, M8 Washers, and M8 Nuts.
Tip
The Power Unit is heavy. We recommend you have one person hold the Power Unit
while another person bolts it in place.
Summary of Contents for D4-12
