D4-12 Series Four-Post Lifts
53
P/N 5900246 — Rev. B — July 2021
Alignment Turn Plates (D4-12A model only)
Alignment Turn Plates are used for Vehicle alignments. They are used in conjunction with a Moveable
Riser to fill the lowered space at the Front of the Lift.
To install the Alignment Turn Plates
:
Find the two Alignment Turn Plates, then put one in each lowered space at the front of the Runways.
The Alignment Turn Plate can go in either location in the lowered space; the Moveable Riser goes in
the other location.
Put the Turn Plate closer to the front of the Lift (closer to the Tire Stops) if you are going to be doing
alignments on Vehicles with shorter wheelbases; automobiles, for example.
For Vehicles with longer wheelbases (i.e. bigger trucks), put the Turn Plate closer to the Rear of the
Lift. This orientation prevents Vehicles with longer wheelbases from hanging so far over the Front of the
Lift that they interfere with using the Aligner.
Summary of Contents for D4-12
