D4-12 Series Four-Post Lifts
39
P/N 5900246 — Rev. B — July 2021
To install the Hydraulic Hose
:
1.
Find the Hydraulic Hose and a Hydraulic Elbow Fitting (PN 5550106).
2.
Prepare the Hydraulic components using the information in
3.
On the Hydraulic Cylinder, remove the Shipping Plug from the Port at the Piston Rod end.
4.
Attach the NPT end of the Elbow Fitting to the Port and tighten it.
Use Thread Sealant on NPT Threads only
.
Drawing shows how to connect the
Hydraulic Fitting to the Hydraulic Cylinder.
View is from underneath the Powerside
Runway.
Not all components are shown.
5.
Attach the Straight end of the Hydraulic Hose to the JIC end and tighten it.
6.
Take the Curved end of the Hydraulic Hose and, starting at the Hydraulic Cylinder, route the
Curved end through the Retaining Rings (along inside edge of the Powerside Runway) and the Flex
Tube opening.
Once done, the Curved end should be coming out of the Flex Tube opening near the Power Unit.
7.
Leave the Curved end of the Hydraulic Hose coming out of the Flex Tube opening for now.
Summary of Contents for D4-12
