Danfoss VLT HVAC, Instruction Manual, Page: 84 / 156

Function:
Select
Input
[0] to define terminal 27 as a dig-
ital input.
Select
Output [1] to define terminal 27 as a
digital output.
This parameter cannot be adjusted while the
motor is running.
5-02 Terminal 29 Mode
Value:
Input [0]
Output [1]
Function:
Select
Input
[0] to define terminal 29 as a dig-
ital input.
Select
Output
[1] to define terminal 29 as a
digital output.
This parameter cannot be adjusted while the
motor is running.
5-12 Terminal 27 Digital Input
Value:
Coast Inverse [2]
Function:
Same options and functions as par. 5-1* Dig-
ital Inputs , except for Pulse input .
5-13 Terminal 29 Digital Input
Value:
Jog [14]
Function:
Same options and functions as par. 5-1*
Dig-
ital Inputs
.
5-14 Terminal 32 Digital Input
Value:
No Operation [0]
Function:
Same options and functions as par. 5-1*
Dig-
ital Inputs
, except for
Pulse input
.
5-15 Terminal 33 Digital Input
Value:
No Operation [0]
Function:
Same options and functions as par. 5-1*
Dig-
ital Inputs
.
5-40 Function Relay
Array [8] (Relay 1 [0], Relay 2 [1],
Relay 7 [6], Relay 8 [7],
Relay 9 [8])
Value:
No Operation [0]
Control Ready [1]
Drive Ready [2]
Drive Ready/Remote [3]
Stand-by/No Warning [4]
Running [5]
Running/No Warning [6]
Run on Ref./No Warning [8]
Alarm [9]
Alarm or Warning [10]
At Torque Limit [11]
Out of Current Range [12]
Below Current, low [13]
Above Current, high [14]
Out of Speed Range [15]
Below Speed, low [16]
6. How to program the adjustable frequency
drive VLT ® HVAC Drive Instruction Manual
84
MG.11.A4.22 - VLT
®
is a registered Danfoss trademark
6