Data storage in LCP:
1.
Go to par. 0-50
LCP Copy
2.
Press the [OK] key.
3.
Select “All to LCP”
4.
Press the [OK] key.
All the parameter settings are now stored in the GLCP as indicated by the progress bar. When
100% is reached, press [OK].
The GLCP can now be connected to another adjustable frequency drive, and the parameter set-
tings can be copied to this adjustable frequency drive.
Data transfer from LCP to adjustable frequency drive:
1.
Go to par. 0-50
LCP Copy
2.
Press the [OK] key.
3.
Select “All from LCP.”
4.
Press the [OK] key.
The parameter settings stored in the GLCP are now transferred to the adjustable frequency drive,
as indicated by the progress bar. When 100% is reached, press [OK].
VLT
®
HVAC Drive Instruction Manual
5. How to operate the adjustable frequency
drive
MG.11.A4.22 - VLT
®
is a registered Danfoss trademark
61
5