Frame size
Bussmann PN*
Rating
Alternative Fuses
F
LPJ-30 SP or SPI
30 A, 600 V
Any listed Class J Dual Element, Time
Delay, 30 A
Table 5.19: 30 A Fuse Protected Terminal Fuse
Frame size
Bussmann PN*
Rating
Alternative Fuses
F
LPJ-6 SP or SPI
6 A, 600 V
Any listed Class J Dual Element, Time
Delay, 6 A
Table 5.20: Control Transformer Fuse
Frame size
Bussmann PN*
Rating
F
GMC-800MA
800 mA, 250 V
Table 5.21: NAMUR Fuse
Frame size
Bussmann PN*
Rating
Alternative Fuses
F
LP-CC-6
6 A, 600 V
Any listed Class CC, 6 A
Table 5.22: Safety Relay Coil Fuse with PILS Relay
5.2.9 Control Terminals
Drawing reference numbers:
1.
10 pole plug digital I/O.
2.
3 pole plug RS485 Bus.
3.
6 pole analog I/O.
4.
USB Connection.
Illustration 5.18: Control terminals (all enclosures)
5.2.10 Control Cable Terminals
To mount the cable to the terminal:
1.
Strip isolation of 9-10 mm
2.
Insert a screw driver
1)
in the rectangular hole.
3.
Insert the cable in the adjacent circular hole.
4.
Remove the screw driver. The cable is now mounted to the ter-
minal.
To remove the cable from the terminal:
1.
Insert a screw driver
1)
in the square hole.
2.
Pull out the cable.
1)
Max. 0.4 x 2.5 mm
VLT
®
HVAC Drive Design Guide
5 How to Install
MG.11.B9.02 - VLT
®
is a registered Danfoss trademark
101
5
