13-02 Stop Event
Option:
Function:
[6]
Current Limit
See parameter group
5-3* Digital
Outputs
for further description.
[7]
Out of current
range
See parameter group
5-3* Digital
Outputs
for further description.
[8]
Below I low
See parameter group
5-3* Digital
Outputs
for further description.
[9]
Above I high
See parameter group
5-3* Digital
Outputs
for further description.
[10]
Out of speed
range
[11]
Below speed low
See parameter group
5-3* Digital
Outputs
for further description.
[12]
Above speed high See parameter group
5-3* Digital
Outputs
for further description.
[13]
Out of feedb.
range
See parameter group
5-3* Digital
Outputs
for further description.
[14]
Below feedb. low
See parameter group
5-3* Digital
Outputs
for further description.
[15]
Above feedb. high See parameter group
5-3* Digital
Outputs
for further description.
[16]
Thermal warning
See parameter group
5-3* Digital
Outputs
for further description.
[17]
Mains out of
range
See parameter group
5-3* Digital
Outputs
for further description.
[18]
Reversing
See parameter group
5-3* Digital
Outputs
for further description.
[19]
Warning
See parameter group
5-3* Digital
Outputs
for further description.
[20]
Alarm (trip)
See parameter group
5-3* Digital
Outputs
for further description.
[21]
Alarm (trip lock)
See parameter group
5-3* Digital
Outputs
for further description.
[22]
Comparator 0
Use the result of comparator 0 in the
logic rule.
[23]
Comparator 1
Use the result of comparator 1 in the
logic rule.
[24]
Comparator 2
Use the result of comparator 2 in the
logic rule.
[25]
Comparator 3
Use the result of comparator 3 in the
logic rule.
[26]
Logic rule 0
Use the result of logic rule 0 in the
logic rule.
[27]
Logic rule 1
Use the result of logic rule 1 in the
logic rule.
[28]
Logic rule 2
Use the result of logic rule 2 in the
logic rule.
13-02 Stop Event
Option:
Function:
[29]
Logic rule 3
Use the result of logic rule 3 in the
logic rule.
[30]
SL Time-out 0
Use the result of timer 0 in the logic
rule.
[31]
SL Time-out 1
Use the result of timer 1 in the logic
rule.
[32]
SL Time-out 2
Use the result of timer 2 in the logic
rule.
[33]
Digital input DI18 Use the value of DI18 in the logic rule
(High=TRUE).
[34]
Digital input DI19 Use the value of DI19 in the logic rule
(High=TRUE).
[35]
Digital input DI27 Use the value of DI27 in the logic rule
(High=TRUE).
[36]
Digital input DI29 Use the value of DI29 in the logic rule
(High=TRUE).
[37]
Digital input DI32 Use the value of DI32 in the logic rule
(High=TRUE).
[38]
Digital input DI33 Use the value of DI33 in the logic rule
(High=TRUE).
[39]
Start command
This event is TRUE if the frequency
converter is started (either via digital
input, fieldbus or other).
[40]
Drive stopped
This event is TRUE if the frequency
converter is stopped or coasted (either
via digital input, fieldbus or other).
[41]
Reset Trip
This event is TRUE if the frequency
converter is tripped (but not trip-
locked) and [Reset] is pressed.
[42]
Auto Reset Trip
This event is TRUE if the frequency
converter is tripped (but not trip-
locked) and an automatic reset is
issued.
[43]
OK Key
This event is TRUE if [OK] is pressed.
[44]
Reset Key
This event is TRUE if [Reset] is pressed.
[45]
Left Key
This event is TRUE if [
◄
] is pressed.
[46]
Right Key
This event is TRUE if [
►
] is pressed.
[47]
Up Key
This event is TRUE if [
▲
] is pressed.
[48]
Down Key
This event is TRUE if [
▼
] is pressed.
[50]
Comparator 4
Use the result of comparator 4 in the
logic rule.
[51]
Comparator 5
Use the result of comparator 5 in the
logic rule.
[60]
Logic rule 4
Use the result of logic rule 4 in the
logic rule.
Parameter Descriptions
VLT
®
HVAC Drive FC 102
108
Danfoss A/S © 03/2015 All rights reserved.
MG11CE02
3
3