3.12 Parameters: 11-** Main Menu -
LonWorks
Parameter group for all LonWorks specific parameters.
Parameters related to LonWorks ID.
11-00 Neuron ID
Range:
Function:
0
*
[0 - 0 ] View the Neuron chip's unique Neuron ID number.
11-10 Drive Profile
Option:
Function:
This parameter allows selecting between
LONMARK functional profiles.
[0]
*
VSD profile The Danfoss Profile and the Node Object are
common for all profiles.
11-15 LON Warning Word
Range:
Function:
0
*
[0 - 65535 ] This parameter contains the LON specific
warnings.
Bit
Status
0
Internal fault
1
Internal fault
2
Internal fault
3
Internal fault
4
Internal fault
5
Reserved
6
Reserved
7
Reserved
8
Reserved
9
Changeable types
10
Initialisation error
11
Internal communication error
12
Software revision mismatch
13
Bus not active
14
Option not present
15
LON input (nvi/nci) exceeds limits
Table 3.17 LON Warning Word
11-17 XIF Revision
Range:
Function:
0
*
[0 - 5 ] This parameter contains the version of the external
interface file on the Neuron C chip on the LON
option.
11-18 LonWorks Revision
Range:
Function:
0
*
[0 - 5 ] This parameter contains the software version of the
application program on the Neuron C chip on the
LON option.
11-21 Store Data Values
Option:
Function:
This parameter is used to activate storing of
data in the non-volatile memory.
[0]
*
Off
Store function is inactive.
[2]
Store all
setups
Stores all parameter values in the E
2
PROM.
The value returns to
Off
when all parameter
values have been stored.
Parameter Descriptions
Programming Guide
MG11CE02
Danfoss A/S © 03/2015 All rights reserved.
105
3
3