manualshive.com logo in svg

Danfoss VLT FC 100, Operating Instructions Manual, Page: 187 / 193

Share
Download
Danfoss VLT FC 100 Operating Instructions Manual Download Page 187

WARNING 203, Missing Motor
A multi-motor under-load situation was detected, this could be due to
e.g. a missing motor.

WARNING 204, Locked Rotor
A multi-motor overload situation was detected, this could be due to e.g.
a locked rotor.

ALARM 243, Brake IGBT
This alarm is only for F Frame drives. It is equivalent to Alarm 27. The
report value in the alarm log indicates which power module generated
the alarm:

1 = left most inverter module.

2 = middle inverter module in F2 or F4 drive.

2 = right inverter module in F1 or F3 drive.

3 = right inverter module in F2 or F4 drive.

5 = rectifier module.

ALARM 244, Heatsink temperature
This alarm is only for F Frame drives. It is equivalent to Alarm 29. The
report value in the alarm log indicates which power module generated
the alarm:

1 = left most inverter module.

2 = middle inverter module in F2 or F4 drive.

2 = right inverter module in F1 or F3 drive.

3 = right inverter module in F2 or F4 drive.

5 = rectifier module.

ALARM 245, Heatsink sensor
This alarm is only for F Frame drives. It is equivalent to Alarm 39. The
report value in the alarm log indicates which power module generated
the alarm:

1 = left most inverter module.

2 = middle inverter module in F2 or F4 drive.

2 = right inverter module in F1 or F3 drive.

3 = right inverter module in F2 or F4 drive.

5 = rectifier module.

ALARM 246, Power card supply
This alarm is only for F Frame drives. It is equivalent to Alarm 46. The
report value in the alarm log indicates which power module generated
the alarm:

1 = left most inverter module.

2 = middle inverter module in F2 or F4 drive.

2 = right inverter module in F1 or F3 drive.

3 = right inverter module in F2 or F4 drive.

5 = rectifier module.

ALARM 247, Power card temperature
This alarm is only for F Frame drives. It is equivalent to Alarm 69. The
report value in the alarm log indicates which power module generated
the alarm:

1 = left most inverter module.

2 = middle inverter module in F2 or F4 drive.

2 = right inverter module in F1 or F3 drive.

3 = right inverter module in F2 or F4 drive.

5 = rectifier module.

ALARM 248, Illegal power section configuration
This alarm is only for F Frame drives. It is equivalent to Alarm 79. The
report value in the alarm log indicates which power module generated
the alarm:

1 = left most inverter module.

2 = middle inverter module in F2 or F4 drive.

2 = right inverter module in F1 or F3 drive.

3 = right inverter module in F2 or F4 drive.

5 = rectifier module.

ALARM 250, New spare part
The power or switch mode power supply has been exchanged. The fre-
quency  converter  type  code  must  be  restored  in  the  EEPROM.  Select
the correct type code in par. 14-23 

Typecode Setting

 according to the

label on the unit. Remember to select ‘Save to EEPROM’ to complete.

ALARM 251, New type code
The frequency converter has a new type code.

8 Warnings and Alarms

VLT HVAC Drive High Power Operating In-

structions

186

MG.11.F3.02 - VLT

®

 is a registered Danfoss trademark

8  

Summary of Contents for VLT FC 100


































































































































































































Reviews:

No comments