3.2.2 Receiving the Frequency Converter
When receiving the frequency converter please make sure that the
packaging is intact, and be aware of any damage that might have oc-
curred to the unit during transport. In case damage has occurred, con-
tact immediately the shipping company to claim the damage.
3.2.3 Transportation and Unpacking
Before unpacking the frequency converter it is recommended that it is
located as close as possible to the final installation site.
Remove the box and handle the frequency converter on the pallet, as
long as possible.
3.2.4 Lifting
Always lift the frequency converter in the dedicated lifting eyes. For all
D and E2 (IP00) enclosures, use a bar to avoid bending the lifting holes
of the frequency converter.
176F
A245.10
Illustration 3.2: Recommended Lifting Method, Frame
Sizes D and E .
The lifting bar must be able to handle the weight of
the frequency converter. See
Mechanical Dimensions
for the weight of the different frame sizes. Maximum
diameter for bar is 2.5 cm (1 inch). The angle from
the top of the drive to the lifting cable should be
60
°
C or greater.
130BA832.11
Illustration 3.3: Recommended Lifting Method, Frame Size
F1
(460V, 600 to 900 HP, 575/690V, 900 to 1150 HP).
3 Mechanical Installation
VLT HVAC Drive High Power Operating In-
structions
14
MG.11.F3.02 - VLT
®
is a registered Danfoss trademark
3