Danfoss VLT AQUA Drive FC 202, Instruction Manual

Page: 22 / 88

4.8.1 Control Terminal Types
Figure 4.7 and Figure 4.8 show the removable adjustable
frequency drive connectors. Terminal functions and default
settings are summarized in
Table 4.3 .
2
3
4
1
130BB921.11
Figure 4.7 Control Terminal Locations
12 13 18 19 27 29 32 33 20 37
39 42 50 53 54 55 61 68 69
130BB931.10
1
2 3
Figure 4.8 Terminal Numbers
•
Connector 1
provides four programmable digital
inputs terminals, two additional digital terminals
programmable as either input or output, a 24 V
DC terminal supply voltage, and a common for
optional customer supplied 24 V DC voltage.
•
Connector 2 terminals (+)68 and (-)69 are for an
RS-485 serial communication connection.
•
Connector 3 provides two analog inputs, one
analog output, 10 V DC supply voltage, and
commons for the inputs and output.
•
Connector 4 is a USB port available for use with
the MCT 10 Set-up Software.
Term-
inal Parameter
Default
setting Description
Terminal description
Digital Inputs/Outputs
12, 13 - +24 V DC 24 V DC supply voltage for
digital inputs and external
transducers. Maximum
output current 200 mA for
all 24 V loads.
18 5-10 [8] Start
Digital inputs.
19 5-11 [0] No
operation
32 5-14 [0] No
operation
33 5-15 [0] No
operation
27 5-12 [2] Coast
inverse
For digital input or output.
Default setting is input.
29 5-13 [14] JOG
20 - Common for digital inputs
and 0 V potential for 24 V
supply.
37 - Safe Torque
Off (STO) Safe input (optional). Used
for STO.
Analog Inputs/Outputs
39 - Common for analog
output.
42 6-50 Speed 0 -
High Limit Programmable analog
output. 0–20 mA or
4–20 mA at a maximum of
500
Ω.
50 - +10 V DC 10 V DC analog supply
voltage for potentiometer
or thermistor. 15 mA
maximum
53 6-1 Reference Analog input. For voltage
or current. Switches A53
and A54 select mA or V.
54 6-2 Feedback
55 - Common for analog input.
Serial Communication
61 - Integrated RC filter for
cable shield. ONLY for
connecting the shield in
the event of EMC
problems.
68 (+) 8-3 RS-485 Interface. A control
card switch is provided for
termination resistance.
69 (-) 8-3
Relays
Electrical Installation
VLT
®
AQUA Drive FC 202
20 Danfoss A/S © 10/2014 All rights reserved. MG20MA22
4 4