Danfoss MCO 350, Operating Instructions Manual, Page: 100 / 102

Index
A
Absolute Encoder 96
Acceleration Feed Forward 38
Accuracy 40
Activate Feed Forward 28
Admixture 51
Angle Synchronisation 58
Application Example 62
Approvals 5
B
Band Width Pid Controller 92
Brake Off Delay 12
Brake On Delay 33
C
Calculation 13
Changing The Gear Ratio With An Analogue Value 51
Control Source Synchronising 89
Control Source Test Run 32
Corrected Numerical Values 13
D
Data Layout 23
Delta Hold Speed 28
Denominator 29
Description Of Fieldbus Interface 23
Description Of Parameters 27
Description Of Terminals 51
Digital Inputs: 17
Digital Outputs 17
Direction Of Rotation 36
Disposal Instruction 5
D-portion 37
E
Earth Leakage Current 6
Embossing Patterns On Mould 62
Encoder Monitor 16
Encoder Resolution 53
Encoder Velocity 29
Error Messages 81
Error Procedure 58
Error Reference 81
Example Of Encoder Interface Connections 19
F
Ffvel Calc 28
Fieldbus Control Signals 24
Fieldbus Status Signals 25
Fine Setting Of The Gear Ratio 58
Fine Setting Of The Position 68
Fixed Offset 30
Function Description 11
Function Diagrams For Marker Synchronisation 69
Function Diagrams For Position Synchronisation 60
Function Diagrams For Speed Synchronisation 47
G
Gear Changing 50
Index
Syncronising Controller MCO 350 Operating
Instructions
100
MG.33.Q1.02 - VLT
®
is a registered Danfoss trademark