Operation guide | iSave 40
78
180R9239 | AQ299555093252en-001601 | iSave 40 | 09.2022
36. When it is placed in the center it can
be pushed in place with the press
tool, from the tool kit.
35. Lubricate the stationary part of the
shaft seal with clean filtered water and
press the ring into the shaft seal cover
using the plastic press bush tool.
Warning:
Ensure that the face with rubber seal is
positioned against shoulder/reces in shaft
seal cover and the ceramic ring upwards.
37. Lubricate the seals with water and
Install the cover for shaftseal. Make
sure to align the drain hole and the
O-ring marked with red arrows.
38. Install the 4 screws and cross tighten
according to torque setting in the
exploded view