Operation guide | iSave 40
10
180R9239 | AQ299555093252en-001601 | iSave 40 | 09.2022
4.3.1 How to assemble the iSave and electric
motor
1) The driver coupling is pre-mounted from
factory. Do not move the coupling.
2) Insert the coupling element into the coupling
in the bell housing.
3) Position the electric motor on the bell
housing. Make sure that the two coupling
parts are connected properly.
4) Tighten the 4 bolts.
Lift the electric motor ONLY in the lifting
eyes provided. The lifting eyes on the
motor must only be used for lifting the
motor – and
not the whole unit
.
4.3.2 Lifting the whole iSave
Tie two lifting belts around the bell housing
before lifting the whole iSave.
Once the lifting is done the lifting
eye must be removed from the
pump.