Operation guide | iSave 40
68
180R9239 | AQ299555093252en-001601 | iSave 40 | 09.2022
5.
Tighten the bolts by using an allen key.
6.
Tilt the flange and stator; assemble and
screw in the rest of the bolts in the
flange. Tighten bolts to a torque of
60 ±6 Nm.
7.
Assemble and position the two pins
in the pin holes.
9.
Mount the O-ring in the sealing
plate and guide pin in flange.
It is important to lubricate to
ensure the O-ring does not drop out.
10. Position the sealing plate on the guide
pin.
Ensure correct choice of sealing plate.
Only one sealing plate fits the guide pin.
11. Position the 8 pins in the rotor.
2 pins in each hole.