H1P 115/130 Auxiliary mounting - Option H4 (SAE D, 13 teeth)
Option H4, ISO 3019-1, flange 152-4 (SAE D, 13 teeth)
P003 391E
4x 161.6 ± 0.35
[6.362 ± 0.014]
14.0 ± 0.25
[0.551 ± 0.010]
338.107 ± 2.0
[13.311 ± 0.079]
316.915 ± 2.0
[12.477 ± 0.079]
8x 80.8 ± 0.175
[3.181 ± 0.007]
∅
159.0
+ 0.13
– 0
[6.260
+ 0.05
– 0
]
∅
152.45
+ 0.076
– 0
[6.002
+ 0.003
– 0
]
27.48 + 1.0
– 0
[1.082 + 0.039
– 0
]
2.5
[0.098]
O-ring seal required
ref 150.0 [5.906] I.D.
x 3.0 [0.118] cross section
Spline data
Number of teeth : 13
Pitch fraction
: 8/16
Pressure angle
: 30°
Pitch-ø
: 41.275 [1.625]
Typ of fit
: Fillet root side
per
: Ansi B92.1-1996 class 6
Thread : M20x2.5-6H THD
Depth : 30.0 [1.181] min.
4x
Mounting flange surface
Flange 152 - 4 per ISO 3019-1
to be paint free
Specifications
Option
H4
Spline
13 teeth, 8/16 pitch
Maximum torque
2206 N•m [19 525 lbf•in]
For definitions of maximum and rated torque values, refer to
H1 Axial Piston Pumps Basic Information,
BC00000057, the section “Shaft Torque Ratings and Spline Lubrication”.
C
Caution
Standard pad cover is installed only to retain coupling during shipping. Do not operate pump without an
auxiliary pump or running cover installed.
Technical Information
H1 Axial Piston Single Pumps, Size 115/130
Dimensions
©
Danfoss | May 2017
11063346 | BC00000198en-US0801 | 47